Author Index

A

  • Abdollahi, Mahdi Synthesis and Characterization of ω-Halogenated Poly(dimethyl siloxane) [Volume 26, Issue 6, 2014, Pages 484-475]
  • Abedini, Hossein Ziegler-Natta Catalyst Preparation Process: Influential Parameters on Particles Morphology and Activity of Catalyst in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 219-209]
  • Ahmadi, Shervin Mechanical Properties and Biodegradability of Polypropylene/Starch Reinforced Nanoclay Blends [Volume 26, Issue 2, 2013, Pages 139-148]
  • Ahmadi, Zahra Photo-oxidation of Polypropylene Fiber and Effective Parameters: A Review [Volume 26, Issue 3, 2013, Pages 208-179]
  • Ahmadjo, Saeid Comparison of Ethylene/1-Hexene Copolymers Microstructures Synthesized by Homogeneous and Heterogeneous Metallocene Catalysts [Volume 26, Issue 1, 2013, Pages 15-24]
  • Ahmadjo, Saeid Polymerization of Ethylene Using α-Diimine Nickel Catalyst [Volume 26, Issue 4, 2013, Pages 335-327]
  • Ako, Mohammad Effect of Shear Rate and Nanoparticles in Extrusion Foaming of Polystyrene in the Presence of Nitrogen Gas [Volume 26, Issue 6, 2014, Pages 511-499]
  • Ali Semsarzadeh, Mohammad Using Cyclohexanol as a Co-Surfactant in the Synthesis of New Mesoporous Silica Particles [Volume 26, Issue 6, 2014, Pages 524-513]
  • Alinejad, Zeinab Preparation of Melamine - Formaldehyde Microcapsules Containing Hexadecane as a Phase Change Material: The Effect of Surfactants Type and Concentration [Volume 26, Issue 1, 2013, Pages 33-44]
  • Allahyarzadeh, V. Surface Modification of Polyester by Nano Titanium Dioxide in Alkaline Media and Their Synergism Effect on the Fabric [Volume 26, Issue 5, 2014, Pages 437-450]
  • Almasi, Hadi Properties of Poly(lactic acid) Nanocomposite Film Containing Modified Cellulose Nanofibers [Volume 26, Issue 6, 2014, Pages 497-485]
  • Almasi, Hadi Effect of Surface Modification by Oleic Acid on Physical Properties of Cellulose Nanofibers [Volume 26, Issue 4, 2013, Pages 302-291]
  • Arab Bafrani, Mohammad Reza Simulation of Rubber Friction Using Viscoelastic Behavior of Rubber and Roughness Parameters of Surfaces [Volume 26, Issue 2, 2013, Pages 149-158]
  • Arabi, Hassan Ziegler-Natta Catalyst Preparation Process: Influential Parameters on Particles Morphology and Activity of Catalyst in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 219-209]
  • Arabi1, Hassan Polymerization of Ethylene Using α-Diimine Nickel Catalyst [Volume 26, Issue 4, 2013, Pages 335-327]
  • Arefazar, A. Nanoclay Effect on the Flow and Thermal Properties of PP/SEBS-g-MA Blend [Volume 26, Issue 5, 2014, Pages 412-403]
  • Asgari, Mahdieh Removal of Fluoride Ion from Aqueous Solution by Nanocomposite Hydrogel Based on Starch/Sodium Acrylate/Nano Aluminum Oxide [Volume 26, Issue 5, 2014, Pages 391-381]

B

  • Badalkhani, Ommolbanin Preparation and Characterization of Conducting Polymer Latices by Chemical Polymerization of Aniline or Anisidine in Presence of Latex: Study of Their Electroactivity and Anti-Corrosion Properties [Volume 26, Issue 4, 2013, Pages 325-317]
  • Bagheri, Rohollah Compatibilization of Multi-Wall Carbon Nanotube/EPDM: Studies on the Properties of Nanocomposite [Volume 26, Issue 2, 2013, Pages 115-123]
  • Bagheri Marandi, Gholam Synthesis of Collagen-Based Hydrogel Nanocomposites Using Montmorillonite and Study of Adsorption Behavior of Cd from Aqueous Solutions [Volume 26, Issue 1, 2013, Pages 73-82]
  • Bahrami, Seyed Hajir Nanofibrous Scaffolds based on Poly(caprolactone)/Chitosan/Poly(vinyl alcohol) Blend for Skin Tissue Engineering [Volume 26, Issue 2, 2013, Pages 159-170]
  • Bahramian, A.R. Polymerization of Phenol Formaldehyde in Solvent-Saturated Vapor and Study on the Microstructure and Mechanical Properties of Novolac Aerogel Product [Volume 26, Issue 5, 2014, Pages 435-427]
  • Bahramian, Ahmad Reza Thermal Protection Performance of Carbon Aerogels Filled with Magnesium Chloride Hexahydrate as a Phase Change Material [Volume 26, Issue 6, 2014, Pages 535-525]
  • Bahri-Laleh, Naeimeh MgCl2 Support Preparation Techniques and Their Effects on Ziegler-Natta Catalysts Performance in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 266-257]
  • Bakhshandeh, G. Nanoclay Effect on the Flow and Thermal Properties of PP/SEBS-g-MA Blend [Volume 26, Issue 5, 2014, Pages 412-403]
  • Bakhshandeh, Gholam Reza Elastomer Nanocomposites Based on Butadiene Rubber, Nanoclay and Epoxy-Polyester Hybrid: Microstructure and Mechanical Properties [Volume 26, Issue 3, 2013, Pages 242-233]
  • Barati, Aboulfazl Removal of Fluoride Ion from Aqueous Solution by Nanocomposite Hydrogel Based on Starch/Sodium Acrylate/Nano Aluminum Oxide [Volume 26, Issue 5, 2014, Pages 391-381]
  • Barikani, M. Nanoclay Dispersion and its Effect on Properties of Waterborne Polyurethanes [Volume 26, Issue 5, 2014, Pages 401-393]
  • Barikani*, Mehdi Variations in Calcium and Alginate Ions Concentration in Relation to the Properties of Calcium Alginate Nanoparticles [Volume 26, Issue 1, 2013, Pages 25-32]
  • Barmar, Mohammad Variations in Calcium and Alginate Ions Concentration in Relation to the Properties of Calcium Alginate Nanoparticles [Volume 26, Issue 1, 2013, Pages 25-32]
  • Baseri, S. Study of Microstructure of Poly(ethylene terephthalate) Fibers by Exposing to Supercritical Carbon Dioxide [Volume 26, Issue 5, 2014, Pages 379-365]

D

  • Daemi, Hamed Variations in Calcium and Alginate Ions Concentration in Relation to the Properties of Calcium Alginate Nanoparticles [Volume 26, Issue 1, 2013, Pages 25-32]
  • Damavandi, Saman Polymerization of Ethylene Using α-Diimine Nickel Catalyst [Volume 26, Issue 4, 2013, Pages 335-327]
  • Dehghannia, Jalal Potato Starch/Montmorillonite-Based Nanocomposites: Water Sensitivity, Mechanical and Thermal Properties and XRD Profile Study [Volume 26, Issue 2, 2013, Pages 91-100]
  • Dehghannia, Jalal Properties of Poly(lactic acid) Nanocomposite Film Containing Modified Cellulose Nanofibers [Volume 26, Issue 6, 2014, Pages 497-485]
  • Dehghannya, Jalal Modeling Water Vapor Sorption and Permeability in Starch-Montmorillonite Nanocomposite Films [Volume 26, Issue 3, 2013, Pages 232-221]
  • Dehghannya, Jalal Effect of Surface Modification by Oleic Acid on Physical Properties of Cellulose Nanofibers [Volume 26, Issue 4, 2013, Pages 302-291]
  • Dolatshahi, Hamid Ziegler-Natta Catalyst Preparation Process: Influential Parameters on Particles Morphology and Activity of Catalyst in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 219-209]

E

  • Ehsani, Morteza Elastomer Nanocomposites Based on Butadiene Rubber, Nanoclay and Epoxy-Polyester Hybrid: Microstructure and Mechanical Properties [Volume 26, Issue 3, 2013, Pages 242-233]
  • Entezam, Mahdi Nanoclay Localization Effect on Melt Rheological Behavior and Microstructure of PP/PET Blend [Volume 26, Issue 1, 2013, Pages 57-72]
  • Eskandari, Zohreh Removal of Fluoride Ion from Aqueous Solution by Nanocomposite Hydrogel Based on Starch/Sodium Acrylate/Nano Aluminum Oxide [Volume 26, Issue 5, 2014, Pages 391-381]

F

  • Fardi, Milad Using Cyclohexanol as a Co-Surfactant in the Synthesis of New Mesoporous Silica Particles [Volume 26, Issue 6, 2014, Pages 524-513]
  • Farrokhi, Mojtaba Synthesis and Characterization of ω-Halogenated Poly(dimethyl siloxane) [Volume 26, Issue 6, 2014, Pages 484-475]
  • Firouzbakht, Mohsen Effect of Carbon Black Blends on the Mechanical Properties of a Tread Compound for Passenger Radial Tires [Volume 26, Issue 1, 2013, Pages 45-56]

G

  • Ghabezi, Pouyan Stiffness Matrices and Anisotropy in the Trapezoidal Corrugated Composite Sheets [Volume 26, Issue 4, 2013, Pages 289-275]
  • Ghafari, Matin Polymerization of Ethylene Using α-Diimine Nickel Catalyst [Volume 26, Issue 4, 2013, Pages 335-327]
  • Ghanbarzadeh, B. Gamma Oryzanol Bearing Nanoliposome Produced by Modified Thermal Method: Thermal Property, Encapsulation Efficiency, Oscillatory Rheometry [Volume 26, Issue 5, 2014, Pages 425-413]
  • Ghanbarzadeh, Babak Potato Starch/Montmorillonite-Based Nanocomposites: Water Sensitivity, Mechanical and Thermal Properties and XRD Profile Study [Volume 26, Issue 2, 2013, Pages 91-100]
  • Ghanbarzadeh, Babak Modeling Water Vapor Sorption and Permeability in Starch-Montmorillonite Nanocomposite Films [Volume 26, Issue 3, 2013, Pages 232-221]
  • Ghanbarzadeh, Babak Properties of Poly(lactic acid) Nanocomposite Film Containing Modified Cellulose Nanofibers [Volume 26, Issue 6, 2014, Pages 497-485]
  • Ghanbarzadeh, Babak Effect of Surface Modification by Oleic Acid on Physical Properties of Cellulose Nanofibers [Volume 26, Issue 4, 2013, Pages 302-291]
  • Ghasemi, Ismail Transesterification Reactions in PC/PBT Blend in Presence of Nanoclay Particles and Their Effect on Blend Morphology [Volume 26, Issue 2, 2013, Pages 101-113]
  • Ghasemi, Maryam Preparation of Melamine - Formaldehyde Microcapsules Containing Hexadecane as a Phase Change Material: The Effect of Surfactants Type and Concentration [Volume 26, Issue 1, 2013, Pages 33-44]
  • Gholami, Ronak Potato Starch/Montmorillonite-Based Nanocomposites: Water Sensitivity, Mechanical and Thermal Properties and XRD Profile Study [Volume 26, Issue 2, 2013, Pages 91-100]
  • Gholami, Ronak Modeling Water Vapor Sorption and Permeability in Starch-Montmorillonite Nanocomposite Films [Volume 26, Issue 3, 2013, Pages 232-221]
  • Gholipour-Kanani, Adeleh Nanofibrous Scaffolds based on Poly(caprolactone)/Chitosan/Poly(vinyl alcohol) Blend for Skin Tissue Engineering [Volume 26, Issue 2, 2013, Pages 159-170]
  • Ghoreishy, Mir Hamid Reza Effect of Carbon Black Blends on the Mechanical Properties of a Tread Compound for Passenger Radial Tires [Volume 26, Issue 1, 2013, Pages 45-56]
  • Ghoreishy, Mir Hamid Reza Optimization of Mechanical, Dynamical and Thermal Properties of a High Performance Tread Compound for Radial Tires [Volume 26, Issue 2, 2013, Pages 125-138]
  • Golzar, Mohammad Stiffness Matrices and Anisotropy in the Trapezoidal Corrugated Composite Sheets [Volume 26, Issue 4, 2013, Pages 289-275]

H

  • Hadian, Najmeh MgCl2 Support Preparation Techniques and Their Effects on Ziegler-Natta Catalysts Performance in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 266-257]
  • Haghighat Kish, Mohamad Photo-oxidation of Polypropylene Fiber and Effective Parameters: A Review [Volume 26, Issue 3, 2013, Pages 208-179]
  • Hakim, Shokoofeh MgCl2 Support Preparation Techniques and Their Effects on Ziegler-Natta Catalysts Performance in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 266-257]
  • Hamishekar, Hamed Gamma Oryzanol Bearing Nanoliposome Produced by Modified Thermal Method: Thermal Property, Encapsulation Efficiency, Oscillatory Rheometry [Volume 26, Issue 5, 2014, Pages 425-413]
  • Hanifi, Saeed Mechanical Properties and Biodegradability of Polypropylene/Starch Reinforced Nanoclay Blends [Volume 26, Issue 2, 2013, Pages 139-148]
  • Honarkar, H. Nanoclay Dispersion and its Effect on Properties of Waterborne Polyurethanes [Volume 26, Issue 5, 2014, Pages 401-393]
  • Hoseini, M. Gamma Oryzanol Bearing Nanoliposome Produced by Modified Thermal Method: Thermal Property, Encapsulation Efficiency, Oscillatory Rheometry [Volume 26, Issue 5, 2014, Pages 425-413]

J

  • Joghataie, Mohammad Taghi Nanofibrous Scaffolds based on Poly(caprolactone)/Chitosan/Poly(vinyl alcohol) Blend for Skin Tissue Engineering [Volume 26, Issue 2, 2013, Pages 159-170]

K

  • Karabi, Mohammad Transesterification Reactions in PC/PBT Blend in Presence of Nanoclay Particles and Their Effect on Blend Morphology [Volume 26, Issue 2, 2013, Pages 101-113]
  • Karimi, M. Study of Microstructure of Poly(ethylene terephthalate) Fibers by Exposing to Supercritical Carbon Dioxide [Volume 26, Issue 5, 2014, Pages 379-365]
  • Kazemi, A. Polymerization of Phenol Formaldehyde in Solvent-Saturated Vapor and Study on the Microstructure and Mechanical Properties of Novolac Aerogel Product [Volume 26, Issue 5, 2014, Pages 435-427]
  • Kazemi, Ali Thermal Protection Performance of Carbon Aerogels Filled with Magnesium Chloride Hexahydrate as a Phase Change Material [Volume 26, Issue 6, 2014, Pages 535-525]
  • Keshavarz, Ali Optimization of Mechanical, Dynamical and Thermal Properties of a High Performance Tread Compound for Radial Tires [Volume 26, Issue 2, 2013, Pages 125-138]
  • Khademeh Molavi, Fatemeh Compatibilization of Multi-Wall Carbon Nanotube/EPDM: Studies on the Properties of Nanocomposite [Volume 26, Issue 2, 2013, Pages 115-123]
  • Khakzad, Fahimeh Preparation of Melamine - Formaldehyde Microcapsules Containing Hexadecane as a Phase Change Material: The Effect of Surfactants Type and Concentration [Volume 26, Issue 1, 2013, Pages 33-44]
  • Khonakdar, Hossein Ali Nanoclay Localization Effect on Melt Rheological Behavior and Microstructure of PP/PET Blend [Volume 26, Issue 1, 2013, Pages 57-72]
  • Khonakdar, Hossien Ali Comprehensive Study on Thermal and Dynamic Mechanical Behavior of PET/PEN Blends [Volume 26, Issue 4, 2013, Pages 316-303]
  • Kurdtabar, Mehran Synthesis of Collagen-Based Hydrogel Nanocomposites Using Montmorillonite and Study of Adsorption Behavior of Cd from Aqueous Solutions [Volume 26, Issue 1, 2013, Pages 73-82]

M

  • Mahdavian, Ali Reza Preparation of Melamine - Formaldehyde Microcapsules Containing Hexadecane as a Phase Change Material: The Effect of Surfactants Type and Concentration [Volume 26, Issue 1, 2013, Pages 33-44]
  • Mahdavian, Ali Reza Cure Kinetics of Epoxy-Novolac Resin Containing Tetrabromo-bisphenol-A as a Flame Retardant by Isothermal Calorimetry Method [Volume 26, Issue 6, 2014, Pages 547-537]
  • Massoumi, Bakhshali Preparation and Characterization of Conducting Polymer Latices by Chemical Polymerization of Aniline or Anisidine in Presence of Latex: Study of Their Electroactivity and Anti-Corrosion Properties [Volume 26, Issue 4, 2013, Pages 325-317]
  • Mehrabi Kooshki, Razieh Transesterification Reactions in PC/PBT Blend in Presence of Nanoclay Particles and Their Effect on Blend Morphology [Volume 26, Issue 2, 2013, Pages 101-113]
  • Mirabedini, Seyed Mojtaba Mechanical Properties of a Water-Based Acrylic Coating Containing Microcapsules of Rapeseed Oil- Ethyl Cellulose [Volume 26, Issue 4, 2013, Pages 358-349]
  • Miri, S. Taghi Removal of Fluoride Ion from Aqueous Solution by Nanocomposite Hydrogel Based on Starch/Sodium Acrylate/Nano Aluminum Oxide [Volume 26, Issue 5, 2014, Pages 391-381]
  • Moghimi, A. Skin Permeation Enhancers and their Effects on Narcotic Transdermal Drug Delivery Systems through Response Surface Experimental Design [Volume 26, Issue 6, 2014, Pages 473-459]
  • Mohammad Hassani, Z. Gamma Oryzanol Bearing Nanoliposome Produced by Modified Thermal Method: Thermal Property, Encapsulation Efficiency, Oscillatory Rheometry [Volume 26, Issue 5, 2014, Pages 425-413]
  • Montazer, M. Surface Modification of Polyester by Nano Titanium Dioxide in Alkaline Media and Their Synergism Effect on the Fabric [Volume 26, Issue 5, 2014, Pages 437-450]
  • Moosabeiki, Vahid Manufacturing Method of Carbon/Phenolic Composites and its Implication on Ablative Charactristics [Volume 26, Issue 3, 2013, Pages 256-243]
  • Morshed, M. Study of Microstructure of Poly(ethylene terephthalate) Fibers by Exposing to Supercritical Carbon Dioxide [Volume 26, Issue 5, 2014, Pages 379-365]

N

  • Naderi, Ghasem Effect of Carbon Black Blends on the Mechanical Properties of a Tread Compound for Passenger Radial Tires [Volume 26, Issue 1, 2013, Pages 45-56]
  • Naderi, Ghasem Compatibilization of Multi-Wall Carbon Nanotube/EPDM: Studies on the Properties of Nanocomposite [Volume 26, Issue 2, 2013, Pages 115-123]
  • Naderi, Ghasem Optimization of Mechanical, Dynamical and Thermal Properties of a High Performance Tread Compound for Radial Tires [Volume 26, Issue 2, 2013, Pages 125-138]
  • Naderi, Ghasem Elastomer Nanocomposites Based on Butadiene Rubber, Nanoclay and Epoxy-Polyester Hybrid: Microstructure and Mechanical Properties [Volume 26, Issue 3, 2013, Pages 242-233]
  • Naseri, I. Polymerization of Phenol Formaldehyde in Solvent-Saturated Vapor and Study on the Microstructure and Mechanical Properties of Novolac Aerogel Product [Volume 26, Issue 5, 2014, Pages 435-427]
  • Naseri, Iman Thermal Protection Performance of Carbon Aerogels Filled with Magnesium Chloride Hexahydrate as a Phase Change Material [Volume 26, Issue 6, 2014, Pages 535-525]
  • Nasiri*, Ali Reza Performance of Partially-Hydrolyzed Polyacrylamide in Water Based Drilling Fluids [Volume 26, Issue 1, 2013, Pages 3-13]
  • Navid Famili, M. Hossein Effect of Shear Rate and Nanoparticles in Extrusion Foaming of Polystyrene in the Presence of Nitrogen Gas [Volume 26, Issue 6, 2014, Pages 511-499]
  • Nejabat, Gholam-Reza Ziegler-Natta Catalyst Preparation Process: Influential Parameters on Particles Morphology and Activity of Catalyst in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 219-209]
  • Nekoomanesh-Haghighi, Mehdi MgCl2 Support Preparation Techniques and Their Effects on Ziegler-Natta Catalysts Performance in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 266-257]

O

  • Oromiehie, Abdulrasoul Mechanical Properties and Biodegradability of Polypropylene/Starch Reinforced Nanoclay Blends [Volume 26, Issue 2, 2013, Pages 139-148]

P

  • Peyvand Kermani, Zohreh Synthesis of Collagen-Based Hydrogel Nanocomposites Using Montmorillonite and Study of Adsorption Behavior of Cd from Aqueous Solutions [Volume 26, Issue 1, 2013, Pages 73-82]

R

  • Ranjbar, Aazam Nanoclay Effect on the Flow and Thermal Properties of PP/SEBS-g-MA Blend [Volume 26, Issue 5, 2014, Pages 412-403]
  • Ranjbar, M. Nanoclay Effect on the Flow and Thermal Properties of PP/SEBS-g-MA Blend [Volume 26, Issue 5, 2014, Pages 412-403]
  • Razzaghi-Kashani, Mehdi Simulation of Rubber Friction Using Viscoelastic Behavior of Rubber and Roughness Parameters of Surfaces [Volume 26, Issue 2, 2013, Pages 149-158]
  • Razzaghi Kashani, M. Polymerization of Phenol Formaldehyde in Solvent-Saturated Vapor and Study on the Microstructure and Mechanical Properties of Novolac Aerogel Product [Volume 26, Issue 5, 2014, Pages 435-427]
  • Rezaee Shirin-Abadi, Abbas Preparation of Melamine - Formaldehyde Microcapsules Containing Hexadecane as a Phase Change Material: The Effect of Surfactants Type and Concentration [Volume 26, Issue 1, 2013, Pages 33-44]
  • Rezayi Mokarram, R. Gamma Oryzanol Bearing Nanoliposome Produced by Modified Thermal Method: Thermal Property, Encapsulation Efficiency, Oscillatory Rheometry [Volume 26, Issue 5, 2014, Pages 425-413]

S

  • Sabetzadeh, M. Nanoclay Effect on the Flow and Thermal Properties of PP/SEBS-g-MA Blend [Volume 26, Issue 5, 2014, Pages 412-403]
  • Samadikuchaksaraei, Ali Nanofibrous Scaffolds based on Poly(caprolactone)/Chitosan/Poly(vinyl alcohol) Blend for Skin Tissue Engineering [Volume 26, Issue 2, 2013, Pages 159-170]
  • Semsarzadeh*, Mohammad Ali Preparation and Characterization of Polyurethane-Polydimethylsiloxane/Polyamide12-b-Polytetramethylene Glycol Blend Membranes for Gas Separation [Volume 26, Issue 4, 2013, Pages 348-337]
  • Sharifpour, Hosein Effect of Shear Rate and Nanoparticles in Extrusion Foaming of Polystyrene in the Presence of Nitrogen Gas [Volume 26, Issue 6, 2014, Pages 511-499]
  • Shokoohi, Shirin Elastomer Nanocomposites Based on Butadiene Rubber, Nanoclay and Epoxy-Polyester Hybrid: Microstructure and Mechanical Properties [Volume 26, Issue 3, 2013, Pages 242-233]
  • Shokrolahi, Fatemeh Cure Kinetics of Epoxy-Novolac Resin Containing Tetrabromo-bisphenol-A as a Flame Retardant by Isothermal Calorimetry Method [Volume 26, Issue 6, 2014, Pages 547-537]
  • Shokrolahi, Parvin Cure Kinetics of Epoxy-Novolac Resin Containing Tetrabromo-bisphenol-A as a Flame Retardant by Isothermal Calorimetry Method [Volume 26, Issue 6, 2014, Pages 547-537]
  • Soltani, Sedigheh Compatibilization of Multi-Wall Carbon Nanotube/EPDM: Studies on the Properties of Nanocomposite [Volume 26, Issue 2, 2013, Pages 115-123]

T

  • Taghizadeh, S.M. Skin Permeation Enhancers and their Effects on Narcotic Transdermal Drug Delivery Systems through Response Surface Experimental Design [Volume 26, Issue 6, 2014, Pages 473-459]

V

  • Vakili, Eshagh Vakili Preparation and Characterization of Polyurethane-Polydimethylsiloxane/Polyamide12-b-Polytetramethylene Glycol Blend Membranes for Gas Separation [Volume 26, Issue 4, 2013, Pages 348-337]
  • Valizadeh, Majid Performance of Partially-Hydrolyzed Polyacrylamide in Water Based Drilling Fluids [Volume 26, Issue 1, 2013, Pages 3-13]

Y

  • Yousefi, Ali Akbar Nanoclay Localization Effect on Melt Rheological Behavior and Microstructure of PP/PET Blend [Volume 26, Issue 1, 2013, Pages 57-72]

Z

  • Zakiyan, S. Esmaeil Effect of Shear Rate and Nanoparticles in Extrusion Foaming of Polystyrene in the Presence of Nitrogen Gas [Volume 26, Issue 6, 2014, Pages 511-499]
  • Zamani, Jamal Manufacturing Method of Carbon/Phenolic Composites and its Implication on Ablative Charactristics [Volume 26, Issue 3, 2013, Pages 256-243]
  • Zoghi, Sepideh Elastomer Nanocomposites Based on Butadiene Rubber, Nanoclay and Epoxy-Polyester Hybrid: Microstructure and Mechanical Properties [Volume 26, Issue 3, 2013, Pages 242-233]
  • Zohuri, Gholamhossein Polymerization of Ethylene Using α-Diimine Nickel Catalyst [Volume 26, Issue 4, 2013, Pages 335-327]